PTFE Seals & Teflon™ Seals | Duron Materials

Custom PTFE Seals in Duron Materials

Polytetrafluoroethylene (PTFE) seals, often called Teflon™ seals, handle the conditions that shorten the life of rubber and elastomer seals: aggressive chemicals, dry running, low friction requirements, and extreme temperatures. Performance Sealing Inc. (PSI) supplies custom PTFE seals in 14 Duron® materials, from virgin PTFE to glass, carbon-graphite, mineral, and proprietary filled grades. The table below compares each grade by temperature range, wear resistance, and mating metal wear.

Contact our technical sales staff to review your operating, hardware, and commercial conditions and develop the best performing seal solution.

PTFE SealsTechnical Resources

Duron® Polytetrafluoroethylene (PTFE)

Material NameMaterial DescriptionOperating Temperature Range (°F)Wear Resistance (1=Poor & 5=Excellent)Mating Metal Wear
DURON® 1 Premium-Grade Polytetrafluoroethylene (PTFE). This material has superior chemical resistance, resistance to weathering, low friction, low and high temperature capability, and electrical and thermal insulation. Color is white. -450 to 500 1 Low
DURON® 38 Modified Polytetrafluoroethylene has superior chemical resistance, low friction, low and high temperature capability, and electrical and thermal insulation properites. Duron® 38 has higher deformation resistance than Duron® 1. Material is white. -450 to 500 3 Low
DURON® 6 Polytetrafluoroethylene (PTFE) with proven Carbon-Graphite Fill has very good wear resistance, and high chemical compatability, in humid conditions and fluid applications. Color is black. -250 to 600 3 Low
DURON® 8 Polytetrafluoroethylene (PTFE) with a Proprietary Organic Fill has efficient wear characteristics along with low friction coefficients and can run dry at moderate surface speeds. This material is desirable for both bearing and sealing applications running on soft metal surfaces. Color is gold. -350 to 575 4 Low
DURON® 9 Polytetrafluoroethylene (PTFE) with a Proven Inorganic Filler is self-lubricating and provides excellent friction resistance and wear properties. This material has one of the lowest metal-mating wear characteristics of all our filled PTFE materials. Color is tan. -450 to 550 3 Low
DURON® 59 Polytetrafluoroethylene (PTFE) with a Proprietary Fill is best used in high PV and high temperature applications, and has excellent corrosion resistance. Color is black. -300 to 600 3 Low
DURON® 67 Modified Polytetrafluoroethylene with Premium Organic Fill has better compressive strength than Duron® 8. Color is orange. -400 to 550 4 Low
DURON® 85 Modified Polytetrafluoroethylene with Carbon-Graphite Fill is best used where a low friction seal is required or where temperature of chemical extremes are encountered. Color is black. -300 to 500 3 Low
DURON® 96 Polytetrafluoroethylene (PTFE) is a material that has efficient wear resistance and large tolerance to permanent deformation under loading. Duron® 96 has excellent chemical compatibility with a wide range of fluids. Color is black. -320 to 500 2 Low
DURON® 4 Polytetrafluoroethylene (PTFE) with Mineral Fill. This material has greater wear and extrusion resistance than Virgin PTFE. Material is FDA approved. Color is off white. -250 to 500 4 High
DURON® 5 Polytetrafluoroethylene (PTFE) with Graphite Fill has very good wear resistance, and high chemical compatability, in humid conditions and fluid applications. Similar to Duron® 6 with more fill. Color is black. -300 to 575 2 Low
DURON® 11 Polytetrafluoroethylene (PTFE) with Glass Fill. Duron® 11 shares the same chemical compatability benefits as Duron® 1 with much higher wear and pressure tolerances and is an appropriate material for bearing and sealing applications. The wear on the shaft or dynamic bore should be considered. Color is grey. -320 to 475 4 High
DURON® 134 Polytetrafluoroethylene (PTFE) with Carbon-Graphite Fill is a choice material often used in aqueous fluid media at high temperatures. Color is black. -250 to 600 4 Low
DURON® 510 Polytetrafluoroethylene (PTFE) with Carbon-Graphite, and other Premium Fillers has excellent wear characteristics with low coefficients of friction. This is one of our best wear materials used for rotary and high speed reciprocating applications. Color is black. -400 to 550 4 Medium

Where PTFE Seals Perform Best

PTFE seals work in oilfield equipment, compressors, mechanical seals, hydraulic actuators, aircraft engines, brake systems, and food processing equipment. Duron PTFE grades on this page have a typical operating temperature range from -450°F to 600°F, depending on the filler.

How to Choose a PTFE Seal Material

Filler selection sets wear life, friction, and how hard the seal is on the mating surface.

  • Virgin PTFE (Duron® 1): chemical resistance and low friction, with a typical operating range of -450°F to 500°F and the lowest wear rating (1 of 5).
  • Carbon-graphite filled (Duron® 6, 85, 134): low mating metal wear. Duron 134 suits aqueous media at temperatures up to 600°F.
  • Glass and mineral filled (Duron® 11, 4): wear rating of 4 of 5 and greater extrusion resistance, but high mating metal wear, so check shaft or bore hardness. Duron 4 is FDA approved.
  • Duron® 510: one of our best wear materials for rotary and high speed reciprocating service, with a typical operating range of -400°F to 550°F.

PSI also applies PTFE in spring energized PTFE seals, PTFE rotary lip seals, and hydraulic seals. For the full Duron family, see Duron® sealing solutions.

PTFE Seals FAQ

Are PTFE seals and Teflon™ seals the same?

Yes. Teflon™ is a brand name for PTFE, so PTFE seals and Teflon™ seals are the same material. Specify PTFE and the Duron grade on your drawing.

What does PTFE stand for?

Polytetrafluoroethylene, a fluoropolymer known for chemical resistance, low friction, and a wide temperature range.

What temperature range do PTFE seals handle?

Our Duron PTFE grades have a typical operating temperature range from -450°F to 600°F. Virgin Duron 1 has a typical range of -450°F to 500°F, while Duron 6, 59, and 134 reach 600°F.

Which PTFE seal material has the best wear resistance?

Duron 510 is our recommendation for rotary and high speed reciprocating applications. Duron 4, 8, 11, 67, and 134 also rate 4 of 5 for wear.

Are PTFE seals FDA approved?

Duron 4, a mineral filled PTFE, is FDA approved. See the UL and FDA Material Regulations for PTFE resource for details.

Request a quote or call 866.429.2536 to talk with a sealing specialist.

Teflon™ is a trademark of The Chemours Company.

Request A Quote Online Or Call Us At 866.429.2536